Ashirwad Engineering
Narela, New Delhi, Delhi
GST No. 07APIPD1709A1ZL
TrustSEAL Verified
Call 0804897291986% Response Rate
SEND EMAIL
Product Details:
| Mixing Capacity | 75 Litres |
| Chamber Volume | 170 Litres |
| Main Motor | 100 HP |
| Tilting Method | Pneumatic |
| Rotor Speed (Front / Rear) | 30/24 RPM |
| Tilting Angle | 120-140 Degree |
| Tilting Motor | 3 HP |
| Air Compressor | 10 HP |
| Condition | New |
| Country of Origin | Made in India |
Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.
MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER:
Mixing Chamber:
Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.
Mixing Rotors:
Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.
Pressure Lid:
Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)
Dust Seal:
Designed specifically to maintain the environment clean, and easily changed.
Applications
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Mixing Capacity | 100 litter |
| Chamber Volume | 230 litter |
| Main Motor | 120 hp |
| Tilting Method | Hydraulic |
| Rotor Speed (Front / Rear) | 35,42 |
| Tilting Angle | Hydraulic |
| Tilting Motor | 5hp |
Additional Information:
Product Details:
| Mixing Capacity | 55 Litres |
| Chamber Volume | 125 Litres |
| Main Motor | 75 HP |
| Tilting Method | Pneumatic |
| Rotor Speed (Front / Rear) | 30/25 RPM |
| Tilting Angle | 120-140 Degree |
| Tilting Motor | 3 HP |
| Air Compressor | 7.5 HP |
| Condition | New |
| Country of Origin | Made in India |
Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.
MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER:
Mixing Chamber:
Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.
Mixing Rotors:
Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.
Pressure Lid:
Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)
Dust Seal:
Designed specifically to maintain the environment clean, and easily changed.
Applications
Additional Information:
Product Details:
| Mixing Capacity | 55 Litres |
| Main Motor | 55 kW |
| Tilting Method | Hydraulic |
| Tilting Angle | 130 Degrees |
| Tilting Motor | 3 HP |
| Air Compressor | 7.5 HP |
| Condition | New |
| Country of Origin | Made in India |
Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.
MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER:
Mixing Chamber:
Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.
Mixing Rotors:
Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.
Pressure Lid:
Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)
Dust Seal:
Designed specifically to maintain the environment clean, and easily changed.
Applications
Product Details:
| Minimum Order Quantity | 1 Piece |
| Mixing Capacity | 100 Litres |
| Chamber Volume | 215 Litres |
| Main Motor | 125 HP |
| Tilting Method | Hydraulic |
| Rotor Speed (Front / Rear) | 30/25 RPM |
| Tilting Angle | 120-140 Degree |
| Tilting Motor | 3 HP |
| Air Compressor | 10 HP |
| Condition | New |
| Country of Origin | Made in India |
Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.
MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER:
Mixing Chamber:
Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.
Mixing Rotors:
Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.
Pressure Lid:
Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)
Dust Seal:
Designed specifically to maintain the environment clean, and easily changed.
Applications
Product Details:
| Minimum Order Quantity | 1 Piece |
| Mixing Capacity | 35 Litres |
| Chamber Volume | 75 Litres |
| Main Motor | 45 kW |
| Tilting Method | Pneumatic |
| Rotor Speed (Front / Rear) | 30/25 RPM |
| Tilting Angle | 130 Degree |
| Tilting Motor | 3 HP |
| Air Compressor | 3 HP |
| Condition | New |
| Country of Origin | Made in India |
Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.
MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER:
Mixing Chamber:
Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.
Mixing Rotors:
Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.
Pressure Lid:
Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)
Dust Seal:
Designed specifically to maintain the environment clean, and easily changed.
Applications
Product Details:
| Mixing Capacity | 25 Litres |
| Chamber Volume | 45 Litres |
| Main Motor | 22 kW |
| Tilting Method | Hydraulic |
| Rotor Speed (Front / Rear) | 35/30 RPM |
| Tilting Angle | 130 Degree |
| Tilting Motor | 2 HP |
| Air Compressor | 3 HP |
| Condition | New |
| Country of Origin | Made in India |
Rubber Dispersion Kneader machine ensures homogeneous compound dispersion, easy colour change cleaning, and simple operation, and represents techno-economic achievement. This kneader may be used to combine a wide range of materials, from low viscosity adhesives to high viscosity rubber. The complete Dispersion Kneader line is built with a cooling jacket, which promotes mixing dispersion and prevents material burning.
MATERIAL CONSTRUCTION OF RUBBER DISPERSION KNEADER:
Mixing Chamber:
Fabricated alloy steel, hard faced, jacketed (both longitudinal and transverse) for steam heating and water cooling and tilt for easy discharge and cleaning.
Mixing Rotors:
Spirally annular design, made of alloy cast steel, with node tips that are internally cored for good temperature regulation. The nodes' land is hard faced and profiled.
Pressure Lid:
Jacketed for effective heating/cooling, steel fabricated, hard faced at mix contact area. (Pneumatic and hydraulic variants available.)
Dust Seal:
Designed specifically to maintain the environment clean, and easily changed.
Applications
Additional Information: